Deck block prep 101: The ultimate guide to preparing your ground
Reviewed by the BuildTuff product team
Quick answer
To prepare ground for deck blocks, remove the grass and topsoil, compact the soil, lay a weed barrier, then add and compact a gravel or paver base. Set a deck block at each support point and level each one by adjusting the base underneath it.

Creating a stable foundation is arguably the most important step when building a floating deck.
In this blog post, we will go through all the steps needed to prepare your ground when using TuffBlocks as the foundation for your deck.
By properly ensuring these steps are followed, you will provide a firm foundation on which the TuffBlocks will sit extending its lifespan for years to come.
Step 1: Measure the Area
The first step in preparing the ground for a deck is to measure the area where you plan to build it. Measure the length and width of the area, and make sure that it is clear of any debris or obstacles. The ground doesn't need to be perfectly level: with TuffBlocks you can adjust the base under each block, or use 4x4 posts on sloped ground.
Step 2: Mark the Area
Once you have measured the area, mark it with spray paint or landscaping paint. This will give you a clear visual of the area where your deck will be built, and help you to ensure that it is the right size and shape.

Step 3: Remove the top soil and vegetation
Next, you will need to clear the area of any debris, rocks, or other obstacles. This includes removing any grass, weeds, or other vegetation, as well as digging up any roots or stumps. It is important to have a clear and level surface for your TuffBlocks to sit on.
To do this you’ll need a sod cutter for removing grass along with its roots, and a shovel to extract it.
For some sites you may need a pickaxe to loosen the top layer before removing with a shovel.
Topsoil can expand and contract in response to changes in temperature and moisture. In hot weather, topsoil can dry out and become more compacted. In contrast, in cold weather, topsoil can become saturated with water, which can lead to soil erosion and other issues.
By removing it, we ensure the TuffBlocks are sat on compacted stable earth. It’s also important to make sure you’re building on grade level earth.
What is grade level earth?
Grade level earth refers to the natural level of the ground before any construction or excavation takes place. It is the surface of the land before any grading, filling, or excavation is done.

Step 4: Compact the Ground
Compacting the ground is an important step when building a structure, as it helps to ensure that the foundation is stable and level. It is necessary to compact the ground before laying a foundation, to ensure that it can support the weight of the structure, and to prevent settling, cracking, or other issues.
Here are some common methods for compacting ground:
Hand Tamping: This is a manual method where a tool called a hand tamper is used to compact the soil by manually striking it with the tamper. It is a good option for small areas or tight spaces where a machine cannot reach.
Plate Compactor: This is a machine that uses a large, flat plate to compact the ground. The plate is powered by an engine and is vibrated to compact the soil. It is a good option for larger areas, and it is more efficient than hand tamping.
Rollers: These are machines that use a large cylinder or drum to compact the ground. They can be either static or vibratory, and are a good option for very large areas.
Rammer: This is a machine that uses a piston to compact the ground. It is typically used to compact soil in tight spaces or in areas where a roller or plate compactor cannot reach.
The method used to compact the ground will depend on the specific project and the desired look and functionality. For most backyard decks, a hand tamper or a rented plate compactor is all you need. If you're unsure about your soil, ask a local landscaper or contractor.

Step 5: Lay a Weed Mat/Barrier
The process of laying a weed mat involves placing a barrier, typically made of a heavy-duty material such as landscape fabric or plastic, over the area where you want to prevent weeds from growing. The barrier is then covered with a layer of crushed stone or paver base.
Weeds can cause several problems when they grow under a deck:
Aesthetics: Weeds growing under a deck can make the area appear unsightly and unkempt.
Growing through the deck: Weeds can push up through the gaps between deck boards or along the edges.
Pests: Weeds can also attract pests such as insects and rodents, which can be a problem if they are growing under a deck.
The process typically begins by preparing the area by removing any existing weeds and grass. Next, the weed mat is cut to the appropriate size and shape to fit the area where you want to prevent weeds from growing. The weed mat is then secured in place with stakes or pins, making sure that it is tight and smooth. The final step is to cover the weed mat with your gravel or paver base (see Step 6).
Gaining access to the weeds becomes a lot more difficult once the deck is in place, and so preventing weeds from growing in the early stages is a lot more effective than trying to resolve the problem at a later date.
Step 6: Lay a Gravel Base
After you have laid your weed barrier, you will need to lay a gravel base. This will serve as a foundation for your TuffBlocks, and will help to keep them level and stable. Spread a layer of gravel over the entire area where your deck will be built, and then use a rake to level it out.
Some common types of aggregate used for drainage in deck building include:
Crushed Stone: Crushed stone is a type of coarse aggregate that is made from crushed rock. It is often used as a base layer for decks, and is known for its excellent drainage properties. It allows water to flow through easily, while also providing a stable foundation for the deck.
Gravel: Gravel is a type of aggregate that is made from small, rounded stones. It is often used as a base layer for decks, and is known for its good drainage properties. It allows water to flow through easily, while also providing a stable foundation for the deck.
Pea Gravel: Pea gravel is a type of small, rounded aggregate that is typically made from crushed rock or natural stone. It is often used as a decorative top layer for decks and other landscaping projects, and is known for its good drainage properties.
Sand: Sand is a type of fine aggregate that is made from natural materials, such as rock or mineral particles. It can be used to fine-tune the level under each block, but on its own it can wash out, so it works best over a compacted gravel base.
Paver base: Paver base is a type of aggregate that is typically used as a base layer for paving projects. It is a mixture of crushed stone, gravel, and sand that is used to create a stable and durable foundation for pavers.
Paver base is typically composed of a combination of large and small stones, which helps to provide a stable and durable foundation for pavers. The large stones provide stability and support, while the smaller stones fill in any gaps and help to create a smooth surface for the pavers to rest on.

Step 7: Install the Deck Blocks
With your ground properly prepared, you are now ready to install your TuffBlocks. They are easy to install, and can be used to support both wood and composite decks. Place a TuffBlock at each support point on your compacted base, then check each one for level before setting your joists or posts.

How to level deck blocks
Getting each block level is what keeps your deck flat and stable. Here's how to do it:
- Start at the high point. Find the highest corner of your deck area and set your first TuffBlock there.
- Use a string line. Run a string line from the first block to each corner so you can see how much each block needs to come up.
- Adjust the base, not the block. Add or remove gravel or paver base under each block, then re-tamp it until the block sits firm and level.
- Check in both directions. Use a small level across the top of each block, side to side and front to back.
- On sloped ground, use posts. Where the ground drops away, sit 4x4 posts in the TuffBlocks and cut each one to length so the frame finishes level.
Final thoughts
These steps outline the process of preparing the ground when building a floating deck on soil, but these steps can vary depending on the type of surface you’re building on.
Creating a stable base is extremely important for floating decks and when done correctly will ensure the longevity of your deck.
For the next steps in building your floating deck, check out our two-part, 10-step guide:
How to Build a Deck Using TuffBlocks: Part 1
How to Build a Deck Using TuffBlocks: Part 2
Deck block prep FAQs
What do you put under deck blocks?
Put deck blocks on firm, compacted ground with the topsoil removed, then add a layer of compacted gravel or paver base. A weed barrier under the gravel helps stop weeds growing under the deck.
Do deck blocks need to be level?
Yes. Each block should sit firm and level so the frame finishes flat. Level each block by adjusting the gravel or paver base underneath it, and use 4x4 posts cut to length on sloped ground.
Do you need to remove grass before placing deck blocks?
Yes. Remove the grass, roots and topsoil where the deck will go. Topsoil moves as it gets wet and dries out, so blocks should sit on compacted ground instead.
How deep should the gravel be under deck blocks?
It depends on your soil and drainage. A few inches of compacted gravel or paver base is common for backyard decks. The key is that it's well compacted and level under each block.
